The entry into the LED plant lighting
High Performance Line


The DIY-M-KIT SMD 60W is perfect for the smallest situations where a lot of light is needed but there is not enough space. Not only perfect as an entry level LED, but also perfect for single plant lighting in shady places.

Our Price 159€

Measured PPFD data

Dimming: stepless dimmable at driver
Grow Space: 40x40cm
Replaces HPS / NDL100W
Output Power: 60W
Radiation Angle: 120°
100cm x 100cm
PPFD - Min
PPFD - Max
171 µmol/m²s
100cm x 100cm
PPFD - Min
PPFD - Max
169 µmol/m²s


All our DIY-M-KITs are dimmable

Remove the black rubber cap on the driver and use a small screwdriver to turn the relatively deep laying screw to the left to dim down. Put the cap back on, the thing will be lost quickly.

Left Turn: 50% - 700mA - (25W per CXB3590)
Right Turn: 100% - 1400mA - (50W per CXB3590)


Add-On Board (fruit phases)

Our add-on board was developed as an add-on for our COB-SMD kits to improve the performance of the Cree CXB 3590 in 3500k in the Deep / FarRed area. Operated alone, we recommend it for pure fruit phases!

Veg Board (propagation and growth phases)

The Veg-Board is designed for the propagation and growth phases of plants. A blue light spectrum with a peak in the range of 440 nm is particularly required here.

Flower Board (growth & fruit phases)

The Flower Board is suitable for the entire plant cycle - from the seedling to the final fruit, the Flower Board is our recommendation.

Only the best components!


When it comes to driver quality, there is no compromise when it comes to high system efficiency - only the market leader MeanWell is used in our products.


With the LM301B / H, Samsung is currently producing the most efficient full-spectrum LED chip, which serves as the basis of our spectrum and ensures a high level of system efficiency.

Osram Square and Osram Oslon SSL are used for the DeepRed (660nm) and the FarRed (730nm) area in the Sunbar SMD Series.

Product information

Here you will find product information as well as building instructions

Assembly manuel DIY-M-KIT SMD 60W

Thorsten is putting the DIY-M-KIT SMD 60w together.

Over 10,000 customers are already benefiting from the new LED technology!

  • The small part really has a great value for money! The tomatoes like the lamp very well, I can only recommend!
    The lamp was super packed and very easy to build together. In case of any confusion I wrote a report that was not answered 10 minutes later by the customer service. I am super satisfied if I buy a DIY KIT again then my pro shop is the first I'll visit to see if you have something for my needs but I'm almost sure if you do not see how you can help me.
  • Very high quality! Chip with immense luminosity! If the power supply is now outsourced, then a smooth 10 nothing in the way! In the reviews, I read that this would be possible on request, a small hint in the description of the article would not be bad! So, TOP items, super quality! But the most important thing is that my plants love this lamp! And with a manageable wattage! Have HP 180 watts running, but will definitely switch to ProEmit! Until next time (-:
    Powerful little lamp! The assembly was really easy. I do not overlook my decision for a single moment. 30 watts less and an estimated 60% more light output. I am very stunned. Since my growing cabinet has now been pimped to my fullest satisfaction, now is the next project in the house. Now that I'm more than convinced of the Cree's performance, I'll be adding a couple of lights to my SanLight's. Hereby a clear buy recommendation from me.
  • Fast delivery, quality parts. Mounting instructions are understandable and suitable for inexperienced people. The 6500K provides a very good light for the breeding of seedlings and young plants. Due to the design of the lamp, it is recommended to hang the lamp higher. (Had area with 80x60 cm, lamp hung 60cm above the ground -> too low, too low illumination). Now you hang 1.20 above the ground and the entire area is sufficiently lit.
    Schnelle Lieferung und der Kundenservice sucht einfach seinesgleichen. Auf jede dumme Frage bekommt man sehr schnell, zu ungedachten Zeiten ob abends oder am Wochenende eine kompetente Beratung oder Antwort. Die Produkte sind genauso erstklassig wie der Kundenservice. Weiter so pro emit!

Product addons

Choose your desired addon for the DIY-M-KIT SMD 60W!
  • FarRed Standalone
    This kit is primarily for sleep initiation. It can also be used as additional lighting to complement white full spectrum LEDs. The DIY KIT can be combined with any lighting. In addition, the Far Red kit can be easily mounted on the previous DIY-M-KITs.
    suncontrol - powered by Casambi
    With the suncontrol your DIY-M-KIT becomes a smart LED and can be controlled and programmed via app. No more annoying manual dimming, from now on you control the LED lights from the couch! To be able to use the suncontrol, you need a driver that can receive dimming signals. (e.g. the "B" drivers of the MeanWell series 0-10v)
    Pro Hanger
    The hanger for the professionals who play it safe! With this hanger you can bring up to 48kg carefree to the correct height. With the simple snap-in method, the height can be adjusted easily. Always a good option when it comes to safe hanging.
Buy now!